FITTINGCART

Leading Suppliers of Pipe Fittings

FITTINGCART

Finest Pipe Fittings Manufacturer

Socket Weld Flange

Manufacturer

When undergoing with large pressure pipes having a tiny low size, we’d like Socket Weld Flange. Though they’re the same as wear flange, Socket Weld Flange contains an indoor recess inside its diameter that ensures sleek flow. Moreover, the foremost advantage of Socket Weld Flange is that with correct attachment and grinding, it makes sleek bore. However, Socket welds are sold at high value as they need knotty machining. Then, Socket Weld Flange was created with associate degree intention for usage in hard-hitting areas at little pipes.
FittingCart has the simplest warehouse facilities that have an enormous stock of Socket Weld Flange able to ship and are accessible altogether dimensional inches. On the opposite hand, we tend to conjointly furnish flange with 1/16’’ raised face once such as by customers. Alternative flat face choices also are accessible and furnishing of normal Bore is additionally done. As matter of truth, we tend to conjointly supply Socket Weld Flange in numerous materials like alloy, chrome steel, steel and a lot of.
Another output that Hydro manufactures is Socket Weld Insert flange. This type of flange permits you to rotate outer flange simply as they are available in an exceedingly two-piece. Hence, providing you with straightforward bolt whole alignments. We tend to conjointly create one piece socket weld insert flange if asked for. Accurately, the two-piece Socket Weld Flange encompasses a dimension of DN15 – DN2000 (1/2″ – 80″). Socket Weld Flange have a fatigue strength of doubly the double-welded don the flange. Of course, bear in mind to form an area between flange and pipe before attachment. This may facilitate scale back stress at the weld root.

socket weld flange
MATERIAL SPECIFICATIONS

OF SOCKET WELD FLANGE

Size

1/4″-4″, DN8-DN100

Pressure at America Series

Category a hundred and fifty, Class 300, Class 600, Class 900A, Class 1500, Class 2500

Pressure at Europe Series

PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN32, PN400

Flange Facing Varieties at America Series

Feminine (F), Male (M), Tongue (T), Groove (G), Flat face (FF), Raised face (RF), Ring kind joints face (RJ/RTJ)

Flange facing varieties at Europe Series

kind A(Flat Face), kind D(Groove), kind B(Raised Face), kind C(Tongue), kind E(Spigot), kind H(O-Ring Groove), kind F(Recess), kind G(O-Ring Spigot)

socket weld flange
socket weld flange

Material

Carbon steel: ASTM A105, C22.8, ASTM A105N, and GB 20. Alloy steel: ASTM/ASME A182 F1-F12-F9- F91- F11-F22- F5. Untainted steel: ASTM/ASME A182 F304-304N-304L-304H-304LN, ASTM/ASME A182 F347-347H, F321-321H, ASTM/ASME A182 316LN-316N-316Ti, F316-316L-316H

Low-Temperature Steel

ASTM/ASME A350 LF2

High performance steel

ASTM/ASME A694 F42, F52, F56, F60, F65, F70

Standard

ASME ANSI B16.5, CSA Z245.12, EN1092-1, EN1759-1, ASME ANSI B16.47. API 605, API 6L. MSS SP 44, DIN2630, DIN2631, DIN2632, DIN2633, DIN2637, DIN2638, DIN2634, DIN2635, DIN2636, BS1560, ISO7005-1, AS2129, JIS B2220, BS4504, BS10, AFNOR NF E29-200-1

Industrial Processes

Die formation, Machining

The standard level for pressure-temperature ratings, tolerances, dimensions, marking and material necessities for steel and solid carbon fittings is B16.11. By identical token, different types of materials embrace forgings, seamless tubes, bars and seamless pipe that square measure relevant to the fittings chemical compositions, mechanical property, and melting practices meet the necessities of ASTM A105, A182, or A350. In keeping with ASME B31.1 levels, for the preparation of Socket Weld Flange, the pipes ought to be inserted into the socket to the utmost depth followed by retreating 1/16’’ (1.6mm) off from the contact of shoulder socket and pipe finish within the assembly of the joint before fastening

Types of Socket Weld Flange

  • Class Designation- 3000 Lbs, 6000 Lbs, 9000 Lbs.
  • Elbows forty five degrees, Elbow ninety degree, Tees, Crosses, Couplings, Half-Couplings, finish or Pipe Caps all starting from ½ – four to ½ – a pair of two ½ – a pair of.
  • Pipe Size (by Wall Thickness)- SCH eighty & XS, SCH 160, XXS
    Plugs and Bushings area unit worn-out through category 6000 NPS

Flange Type Standards Designation

  • Stainless steel Flange- ASTM A182 F304 / 304L / 304H / 316/ 316L / 321 / 310 / 347 etc.
  • Carbon Steel Flange- ASTM A105 / A694 F42/ 46/ 52/56/ 60/ sixty five / seventy / A350 LF3 / A350 LF2, etc.
  • Alloy Steel Flange- ASTM A182 F1 / F5 / F9 / F11 / F22 / F91 etc.
  • Nickel Alloy Flange- ASTM B 366, etc.

To attach this Socket Weld Flange, first off insert the pipe within the Socket finish and at the highest facet unfold the fillet weld. Further, this provides a swish flow within the pipe. FittingCart’s is that the manufacturer and provider of Socket Weld Flange that is obtainable in varied sizes, material grades, and specifications. Above all, our company additionally produces assume flange with a hub that has mere vary ranging from 1/2’’ through 24’’. In fact, they’re furnished a flat face, raised face with 1/16’’ or RTJ facing, our Socket Weld Flange square measure possible in carbon, steel, chrome steel and alloy Socket Weld Flange.

Applications of Socket Weld Flange

  • Applicable for lines transfer burnable, pricey or nephrotoxic material for steam three hundred to 600 PSI with no leaks.
  • Helpful in conjunction with ASME Pipe and area unit accessible within the same size vary.
  • Usage in sectors of permanent pipe-works and are designed to supply smart flow characteristics.
  • They are created to many ASTM standards and are factory-made in accordance with ASME B16.11.
  • They’re accessible in 3 pressure ratings: 3000lbs, 6000lbs, and 9000lbs
  • Process plant for chemical element, element and carboxylic acid acids, Pulp and paper process.
  • Parts in gas cleaning plants and saltwater cooling instrumentation
    Petroleum refinery parts and Wires in static precipitators.

In my opinion, the intention of bottoming clearance during a socket weld flange is simply to decrease the residual pressure at the foundation of the weld that will begin whereas the continuing method of hardening of the fastening metal.

EXPORT GALLERY

Pros and Cons of Socket Weld Flange

Pros:

  • No beveling of the pipe is critical before fastening.
  • Any temporary tack fastening isn’t necessary for alignment because the flange ensures excellent alignment.
  • The bore of the pipe doesn’t let weld metal penetrate into itself.
  • Probabilities of the leak are less if replaced to string fittings.
  • Prevents radiography victimization its fillet.
  • Budget friendly construction expenses as they match precisely thus no special tools and installments.

Cons:

  • The need of growth gap of 1/16 in. between the socket shoulder and also the pipe.
  • The presence of crevices and gap will result in corrosion.
  • Not applicable for immoderate High hydrostatic Pressure as they don’t permit complete penetrate.
FittingCart’s Delivery and Shipping Policy

The packing of socket weld flange is in keeping with international standards, i.e., in strapped bundles with strips, followed by transferring into containers to avoid harm. Our delivery days might take 10-25 days (depends on the stock and space of shipment). Extra packing is in polygonal shape bundles, wood boxes, steel or wood crates and conjointly per customers demand. Moreover, plastic covering is given to every bundle to avoid weather harm. Also, Plastic caps are given at the ends of Socket Weld Pipe Fittings. Next, our things have marks that act as distinctive identifiers. Our regular cargo countries embody Italia, UAE, Bahrain, Indonesia, Australia, Kuwait, Saudi Arabia, African nation, Germany, UK, Denmark, Canada, USA, Peru, Brazil, Nigeria, Mexico, Venezuela (Latin America), South America, Russia, Kazakhstan etc.

Why FittingCart?
  • All our flange square measure in accordance with ANSI B sixteen.5 from 1/2″ to 24″ and categories one hundred fifty to 2500.
  • Flange in accordance with MSS SP forty four customary starting from 26″ to 48″ and categories one hundred fifty to 900 lbs also are offered.
  • Flange with long attachment neck of sizes from 1/2″ to 24″ and square measure from categories one hundred fifty to 2500 lbs.
  • Passageway flange square measure in accordance with ANSI B16.36 from 1″ to 24″ and from three hundred to 2500 lbs.
  • Blind flange square measure from VI Bar to forty Bar in accordance with DIN so square measure put on and attachment neck flange.
  • Flange in accordance with BS10 Table D & Table E, baccalaureate Table F & Table H, and baccalaureate Table J & Table K square measure in from 1/2″ to 24″ and up to 450 lbs.
  • Flange from 2kg to 210 weight unit square measure in accordance with JIS.

Aims of FittingCart

We aim to get on the forefront of innovation in output production lines and sales services. Additionally to it, we’ve got a routine to upgrade merchandise and services to allow us to meet the market levels, expectations, and demands.

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text.

Start typing and press Enter to search